UTStarcom CDM 1080 - Manual (Page 30)

SETTINGS SETTINGS
C
H
4
57
C
H
4
56
To select a ringer type for alarm sound:
ALARM SOUNDS
2 Select your desired ringer type.
3 Select one of the available ring types.
To confirm, press [OK].
1 Press [MENU], then select “Settings & Tools”
menu, then press “Sounds” then select
“Alarm Sounds”, then press “Alarm Tone”.
ALARM TONE
2 Select “On” or “Off”, then press [OK] to save it.
1 Press [MENU], then select “Settings & Tools”
menu, then press “Sounds” then select
“Alarm Sounds”, then press “Alarm Vibrate”.
ALARM VIBRATE
Up or Down key : Select “Ringer”.
Press Play/Pause to Play/Pause the ringer.
Allows you to customize the display.
DISPLAY
To input a personal/ERI banner greeting:
The text greeting can be up to 16 characters and is displayed on
your phone’s screen in standby mode.
BANNER
2 Enter a new personal greeting.
To change the input mode, press [Abc].
To return to the previous page, press
[CANCEL].
3 Press [OK] to save it.
1 Press [MENU], then select “Settings & Tools”
menu, then press “Display” then select
“Banner”, then press “Personal”.
PERSONAL
2 Select “On” or “Off”, then press [OK] to save it.
1 Press [MENU], then select “Settings & Tools”
menu, then press “Display” then select
“Banner”, then press “ERI Banner”.
ERI BANNER