UTStarcom CDM 1080 - Manual (Page 23)

C
H
4
C
H
4
42
CONTACTS CONTACTS
43
In idle mode, calls can be placed to numbers stored in speed dial by
pressing & holding the location number on the key pad. For a 2-digit
location number, press the first number, then press and hold the
second number.
SPEED DIALS
1
2 To assign a phone number to a location, select
the location then press [SET].
3 Select the contact with the Navigation Key then
press [OK]. To confirm, press [OK].
5 “SPEED DIAL SET” will be displayed.
4 To select “Yes” or “No”, press [OK].
• “Unassigned” appears if the location is available.
• To call an assigned number, press & hold the last digit of the
speed dial #.
ERASE GROUP
2 Select an existing group name with the
Navigation Key.
3 To select “Erase”, press [OPTIONS].
4 Select “Yes” to erase it, press [OK].
1 Press [MENU], then select “Contacts” menu,
then press “Groups”.
SEND PIX MSG. GROUP
1 Press [MENU], then select “Contacts” menu,
then press “Groups”.
2 Select an existing group name with the
Navigation Key.
4 Input “Text”, “Picture”, “Sound”, “Subject”,
then press [OPTIONS] to select “Preview”,
“Add Quick Text”, “Save As Drafts”, “Priority
Level”, “Remove Picture”, “Remove Sound”,
“Add Slide”.
5
3 To select “Send Pix Msg”, press [OPTIONS].
5.1. To send the pix message, press [SEND].
5.2. To save the pix message, press [OPTIONS]
then select “Save as Drafts”, then
press [OK].
Press [MENU], then select “Contacts” menu,
then press “Speed Dials”.