UTStarcom CDM 1080 - Manual (Page 29)

C
H
4
55
C
H
4
54
SETTINGS
54
SETTINGS
Sounds an alert when leaving a service area and entering a roaming
service area.
SERVICE ALERTS
1 Press [MENU], then select “Settings & Tools”
menu, then press “Sounds” then select
“Service Alerts”, then press “Service Change”.
SERVICE CHANGE
2 Select “On” or “Off”, then press [OK] to save it.
Sounds an alert every minute during a call.
1 Press [MENU], then select “Settings & Tools”
menu, then press “Sounds” then select
“Service Alerts”, then press “Minute Beep”.
MINUTE BEEP
2 Select “On” or “Off”, then press [OK] to save it.
Notifies you that a call has been successfully placed.
1 Press [MENU], then select “Settings & Tools”
menu, then press “Sounds” then select
“Service Alerts”, then press “Call Connect”.
CALL CONNECT
2 Select “On” or “Off”, then press [OK] to save it.
Allows you to activate/deactivate the power on tones.
POWER ON/OFF SOUNDS
1 Press [MENU], then select “Settings & Tools”
menu, then press “Sounds” then select
“Power On/Off Sounds”, then press
“Power On Sound”.
POWER ON SOUND
2 Select “On” or “Off”, then press [OK] to save it.
Allows you to activate/deactivate the power off tones.
1 Press [MENU], then select “Settings & Tools”
menu, then press “Sounds” then select
“Power On/Off Sounds”, then press
“Power Off Sound”.
POWER OFF SOUND
2 Select “On” or “Off”, then press [OK] to save it.