UTStarcom CDM 1080 - Manual (Page 28)

C
H
4
53
C
H
4
52
SETTINGS
52
SETTINGS
1 Press [MENU], then select “Settings & Tools”
menu, then press “Sounds” then select
“Alert Sounds”, then press “Pix Message”.
PIX MESSAGE
2 Select “Tone”, “Vibrate”, or “Reminder”, then
select one of the following:
Tone : Select your desired ringer type.
Vibrate : Select “On” or “Off”.
Reminder : Select “Once”, “Every 2 Minutes”,
“Every 15 Minutes” or “Off”.
3 To save, press [OK].
1 Press [MENU], then select “Settings & Tools”
menu, then press “Sounds” then select
“Alert Sounds”, then press “Voicemail Msg”.
VOICEMAIL MSG
2 Select “Tone”, “Vibrate”, or “Reminder”, then
select one of the following:
Tone : Select your desired ringer type.
Vibrate : Select “On” or “Off”.
Reminder : Select “Once”, “Every 2 Minutes”,
“Every 15 Minutes” or “Off”.
3 To save, press [OK].
To adjust key pad tone:
KEYPAD VOLUME
2 Select one of the following options by pressing
the Navigation Key to the right.
3 Select one of the available ring types.
To confirm, press [OK].
1 Press [MENU], then select “Settings & Tools”
menu, then press “Sounds” then select
“Keypad Volume”.
Off
Low, Med Low, Med, Med High, High
To adjust earpiece volume:
EARPIECE VOLUME
2 Select one of the following options by pressing
the Navigation Key to the right.
3 Select one of the available ring types.
To confirm, press [OK].
1 Press [MENU], then select “Settings & Tools”
menu, then press “Sounds” then select
“Earpiece Volume”.
Low, Med Low, Med, Med High, High