Settings – UTStarcom CDM 1080 User Manual
Page 60
C
H
6
117
C
H
6
116
SETTINGS
SETTINGS
ENTRY MODE
2
Press [ENTRY MODE].
Select “T9Word”, “Abc”, “ABC” or “123” with
the Navigation Key.
3
Press [OK].
Sets an Entry Mode as a default. For example, if T9 Mode is the
default, its icon will appear.
To edit the Quick Text message you have saved:
QUICK TEXT
2
Press [QUICK TEXT].
2.1. Select a message from the list.
Press [OK].
2.2. To add a new Quick Text message,
press [OPTIONS] to select “Add New”.
To edit the Quick Text message you have
selected, press [OPTIONS] to select
“Edit”, then enter text, press [SAVE].
3
To erase the saved Quick Text message,
press [ERASE].
1
Press [MENU], then select “Messaging”
menu, press [SETTINGS] or press
[MESSAGE], press [SETTINGS].
1
Press [MENU], then select “Messaging”
menu, press [SETTINGS] or press
[MESSAGE], press [SETTINGS].
Pre-defined quick text as below.
1. What’s up?/2. Let's meet./3. Check this out!/4. Whacha
doing?/5. Thanks/6. What do you think?/7. You’ve gotta be here
to enjoy this./8. Would you like to join me for a date tonight?/
9. On my way./10. Yes/11. You’re the best!/12. Call me.
VOICE MAIL#
2
Press [VOICE MAIL#].
Input a new voice call back number or edit
voice call back number.
3
Press [OK].
1
Press [MENU], then select “Messaging”
menu, press [SETTINGS] or press
[MESSAGE], press [SETTINGS].
1
Press [MENU], then select “Messaging”
menu, press [SETTINGS] or press
[MESSAGE], press [SETTINGS].
3
Press [OK].
BLOCK/UNBLOCK
2
Press [BLOCK/UNBLOCK].
Select “Block”, “Unblock” or “View List of
Blocked Addresses” with the Navigation Key.
BLOCK : Enter the address to block.
UNBLOCK : Enter the address to remove from block.
VIEW LIST OF BLOCKED ADDRESSES : Display the blocked
list on LCD.
To press [OPTIONS]. Select either a Wait (“W” appears)
or a Pause (“P” appears).