Handset description – UTStarcom CDM 1080 User Manual
SYSTEM STATUS BAR INDICATOR DISPLAY AREA
Press to make or receive a call.
Press to clear a digit from the display or to return
to the previous page.
Press and hold to enable speaker phone mode.
Press and hold to enter lock mode.
A long press shall display a plus “+”.
A “+” is reserved for international dialing code.
In entry mode, toggle between text mode.
Press to turn the phone on/off, to terminate a call
or to return to the initial page.
Phone is out of home area.
Indicates your phone is in a dormant state during a
data call. Your phone goes to Dormant mode when
you have not had any activity on a page for some
time - your connection is still active and you can
make and receive calls.
Indicates the phone cannot receive a signal from
Indicates your phone is locked.
In Idle Mode
- Press Up to access the Web Browser,
Down to access the Short Cut Key, Right
for Get It Now and Left for Get Pix &Flix.
Inside the menu
- Within a menu, use to scroll through
menu options, or to select a function
displayed on the screen.
(Left Soft Key) Press to access the message
menu or function displayed on bottom line.
(Right Soft Key) Press to access contacts menu
or function displayed on bottom line.
System Status Bar
Indicator Display Area
See page 9 for a list of icons.
Soft Key Display Area
Shows the functions currently
assigned to each soft key and
displays some icons.
Text & Graphic area
Short Cut Key
Get It Now
Get Pix & Flix
Battery charging level – the more blocks, the
stronger the charge.
Indicates your phone is active in TTY mode.
Indicates “Voice Privacy” mode.
Indicates the Location Service of your phone is
Signal Strength - Current signal strength: the
more lines, the stronger the signal (1X Mode/
Phone will alert you with an alarm tone when call