Battery usage – UTStarcom CDM 1080 User Manual

Page 8

Advertising
background image

C

H

1

13

C

H

1

12

BATTERY USAGE

BATTERY USAGE

BATTERY LIFE (FOR NEW BATTERY)

The operating time is subject to your handset usage and configuration.

PCS AND 1X BATTERY TIMES

The operating time is subject to your handset usage and configuration.

• These times are for a new battery. Usage and Standby time

may decrease over time.

• Talk time for the standard battery: about 207 minutes.

Standby time for the standard battery: about 190 hours.

• When you charge the battery with the phone power off, you

will see a charging status screen. You cannot operate the
phone until it is powered on.

• The battery is not charged at the time of purchase.

• Fully charge the battery before use.

• It is more efficient to charge the battery with the handset

powered off.

• The battery must be connected to the phone in order to charge it.

• Battery operating time gradually decreases over time.

• If the battery fails to perform normally, you may need to replace

the battery.

1

Plug the AC Charger into a standard outlet.

2

Plug the other end of the AC Charger into the
bottom of your phone. The battery must be
installed onto the phone.

BATTERY CHARGING

POWER CONNECTION

PCS

Up to 160 minutes

Up to 270 minutes

DCS

Up to 207 minutes

Up to 282 minutes

STD 1000 mAh

Battery Capacity

EXT 1700 mAh

PCS

Up to 172 Hours

Up to 293 Hours

DCS

Up to 190 Hours

Up to 326 Hours

STD 1000 mAh

Battery Capacity

EXT 1700 mAh

Advertising