Univex PRV-LX1 - Manual (Page 19)

19
PRV-LX1
En
Basic Operations
[Operation]
The various operating settings are performed using
the buttons on the main unit’s front panel, as well as
the remote control unit and optional mouse/
keyboard.
7 Operations using remote control unit
The furnished remote control unit has been designed
primarily for video playback control, including
emulation operations before recording images from
HDD to DVD media, and when playing DVD-Video
discs. The remote control unit can also be used to
make Function Menu settings.
Note 1:
The remote control unit cannot be used to turn power ON/
OFF or to perform recording operations.
7 Operations Using a Mouse or Keyboard
A commercially available keyboard or mouse (with
USB connector) can be used to control the main unit
for more efficient selection of setting items. Also,
the keyboard’s function keys can be programmed
with the operations of the main unit’s operating
keys. This not only enhances operating efficiency,
but also allows standard operations to be performed
even at a distance separated from the main unit.
See page 29 for information on function key settings.
Some front panel control buttons are assigned to
shortcut keys. Shortcut key assignments are
described on page 88.
The numeric keys on the keyboard provide the same
functions as the numeric buttons on the remote
control unit. During title text and other text input, any
functions assigned to the keyboard’s normal function
keys are disabled.
Note 2:
Mouse and keyboard are not provided, and must be
purchased separately.
Note 3:
Title text and other text inputs require the use of a
keyboard. The purchase and implementation of a keyboard
is recommended.
Note 4:
Certain special keys (“Play” etc.) found on commercially
available keyboards may not be used.
Note 5:
A connected keyboard or mouse may not be recognized
during the power on and booting operation. In this event,
try disconnecting and then reconnecting the mouse or
keyboard. If the USB port cannot be accessed due to a
specific kind of rack mounting, a USB hub can be attached
to solve this symptom. If a USB hard disk drive is not
recognized, or if operation is unstable, change to a hub
supporting USB 2.0.
USB hub Keyboard/mouse
1 Front panel buttons
MOUSE/KEYBOARD jacks
3 Mouse
2 Remote control unit
4 Keyboard