Univex PRV-LX1 - Manual (Page 70)

70
PRV-LX1
En
Disc Duplication
This unit provides a function for duplicating discs.
Disc-to-disc duplication can be performed by
connecting another DVD drive. This function can be
done on a single drive by creating an image file from
a disc and using this file to create a new disc. Image
files imported via FTP (uploading) can also be used to
create discs (uploaded image files are saved to the
imagefiles folder). See page 72 for information on
FTP connection.
Note 1:
Copyright protected content cannot be duplicated or
used to create image files. The copying of
copyrighted materials requires the permission of the
copyright holder and neighboring rights holder.
Failure to obtain the permission of each rights holder
can be punished by law. Pioneer accepts no liability
whatever for problems arising between the user of
this device and any rights holder.
Note 2:
The time required for disc duplication and creating
image files depend on disc read/write performance.
Disc-to-disc Duplication
Use the Function Menu’s APP section
= [Cpy/
Impt/Bkup]
= [Disc Copy] = [Source] command to
specify the disc to be copied and the [Destination]
command to specify the destination disc when
duplicating discs.
Note:
When a single drive is used, the APP section
=
[Cpy/Impt/Bkup]
= [Disc Copy] command is not
available.
Using APP section
= [Cpy/Impt/Bkup] = [Disc Copy]
to select Source
Using APP section = [Cpy/Impt/Bkup] = [Disc Copy]
to select Destination
Using APP section
= [Cpy/Impt/Bkup] = [Disc Copy]
to execute copying