Univex PRV-LX1 - Manual (Page 32)

32
PRV-LX1
En
System Default Settings
Background Color
Go to SET UP section
= [Operation] = [Video
Settings]
= [Background Color] to select the
background color when the unit is in the idling
condition.
SET UP section = [Operation] = [Video Settings]
= [Background Color]
Composite Video/Audio RCA Output
Signal pass-through is supported on this unit only
with composite video output and audio RCA output
signals.
Use the SET UP section
= [Operation] = [Video
Settings]
= [Composite Out] command to select
“Source Monitor”.
SET UP section
= [Operation] = [Video Settings]
= [Composite Out]
Note:
If [Composite Out] is set to “Source Monitor”
(pass-through output), when OSD is set to ON during
recording, the video and audio will switch to
“Decoder Out” (encode/decode output).
Regardless of the setting of the [Composite Out]
command, outputs other than composite video,
audio RCA and headphones will be treated as
“Decoder Out” (encode/decode output) video and
audio signals.
GUI Language Setting
Use the SET UP section
= [Operation] = [Info
Language]
= [Language] command to change the
language used in the information area of the
Function Menu and text entry language between
English or Japanese.
SET UP section
= [Operation] = [Info Language]
= [Language]