Univex PRV-LX1 - Manual (Page 43)

43
PRV-LX1
En
Recording
EDIT section
= [DVD Disc] = [Unfinalize] = [Unfinalize]
Unfinalize confirmation dialog
Unfinalize progress bar (appears during unfinalization)
Note 2:
However, finalization of DVD-RW discs finalized
using the initial PRV-LX1 version (prior to 1.12/1.02)
cannot be canceled.
3 Removing a disc before finalization
A recorded DVD-R/RW disc can be removed before
finalization. A disc that has not been finalized can be
loaded again for playing or additional recording.
However, it must be finalized to enable playback on
another DVD player.
Note 1:
Removing a recorded DVD disc whether finalized or
not finalized deletes the DVD menu settings, clip
name and chapter name settings. Edit DVD menu
settings, titles and chapter names prior to
finalization.
Note 2:
Discs removed before finalization cannot be played
back and used for making additional recordings on
the initial PRV-LX1 version (prior to 1.12/1.02). If
playback and making additional recordings is not
possible on another PRV-LX1, check the system
version. See “System Information” on page 31 for
information on how to check system version.
Note 3:
Discs removed before finalization cannot be played
back and used for making additional recordings on
home recorders other than the PRV-LX1.
Note 4:
Discs recorded on home recorders other than the
PRV-LX1 that are not finalized cannot be played back
or used for additional recordings on the PRV-LX1.
7 Notes for Simultaneous Recording on Two Drives
÷ Two discs removed simultaneously from each
drive before finalization can be reloaded for
simultaneous additional recording.
÷ Reselecting a drive makes it possible to cancel
simultaneous recording and continue recording on
one drive. Simultaneous recording cannot be
resumed after this. Menus, chapter names and
clip names can be edited after selecting one drive.
Note that resuming a simultaneous recording
after this will delete all edited data.
÷ Finalized discs that are canceled finalization
cannot be used for simultaneous recording.
7 Precautions When Saving Data to Hard Disk
Removing a disc before finalization when a recording
is made both to a DVD disc and the hard disk (see
page 35), the data recorded until the disc is removed
remains on the hard disk. A new project is
automatically created when this disc is reinserted
and additional data that is recorded is saved to this
project. Thus data recorded prior to removal and data
recorded after reinsertion is saved to different
projects.
4 Finalizing discs
A DVD disc must be finalized using the EDIT
section
= [DVD Disc] = [Finalize] command to
complete the recording of a DVD disc.
The DVD menu is recorded on the disc at
finalization depending on made settings.
Note:
In the event the EJECT button is pressed during the
recording stop mode, if the [Operation]
= [Control
Setting]
= [Eject Setting] command on the SETUP
section has been set to “Eject,” the disc will be
ejected without finalizing. In the case of
“Finalize&Eject”, if the drive for the EJECT button
pressed is the same as the drive selected with the
DRIVE SELECT button, a dialog box will appear
asking whether you wish to finalize the disc. Discs
which have not yet been finalized cannot be played
on other DVD players.