Univex PRV-LX1 - Manual (Page 92)

92
PRV-LX1
En
Message Display
Item
REC
Message
HDD_CAPA is not enough.
DVD_CAPA is not enough.
This disc is not writable.
There is no disc.
The number of titles is 99.
No SDI_V Input.
No SDI_A Input.
No AES/EBU Input.
No DV Input.
Copy Protection
ENCODER ERROR********
DRIVE ERROR******
The number of clips is 255.
Comment
The hard disk drive has insufficient open capacity. Erase a
project, to open enough space on the hard disk drive for the
recording.
The DVD disc has insufficient remaining capacity.
The DVD disc cannot be written to.
No disc has been loaded.
This disc has 99 titles recorded; no additional titles can be
recorded.
There is no SDI Video signal input.
There is no SDI Audio signal input.
There is no AES/EBU signal input.
There is no DV signal input.
The input signal has been copy protected; copying is not
possible.
An encode error occurred. Reboot the system.
(******** indicates the error code.)
A drive error occurred. A drive fault may have occurred.
There are 255 project clips. The maximum number of clips in
a project is 255.
7 Messages Displayed in Dialogue Box or Main Unit Display during Recording Operation
Item
Delete Library
Delete Library
Backup / Restore
Backup / Restore
Backup / Restore
Backup / Restore
Backup / Restore
Backup / Restore
Backup / Restore
Backup / Restore
Backup / Restore
Backup / Restore
Backup / Restore
Backup / Restore
Delete
Unfinalize
Unfinalize
Unfinalize
Message
Please select Layout/Background before delete.
Do you really want to delete ******
Cannot restore the current project.
Do you really want to overwrite *****
Does it overwrite all files when the same file
exists ?
Not enough space in HDD.
Backup failed.
Restore failed.
There is saved parameter file. Do you want to
overwrite?
Do you really want to restore system settings.
This PROJECT is protected.
No data to restore.
Illegal data to restore.
Load error.
Delete failed.
Menu Data is lost after unfinalization.
Cannot be unfinalized.
Disc unfinalization failed.
Comment
Select layout/background image to delete.
The ****** file will be deleted.
Restore was attempted for the current project. A current project
cannot be restored.
The ****** file is overwritten.
All files with the same name are overwritten. Select “No” do
display a dialog when there are files with the same name.
No free space left on the hard disk.
Free up space on the internal hard disk or USB HDD.
The backup attempt failed. Either try again, or check for
problems on the USB hard disk.
The restore attempt failed. Either try again, or check for
problems on the USB hard disk.
This parameter has already been set. Press [YES] if you wish
to overwrite the previous setting.
Press [Yes] to overwrite (erase) present system settings.
The target project has been set to protect against erasure, so
cannot overwrite restore.
No data exists to restore.
The data to be restored is faulty.
The data to be restored could not be loaded successfully.
Failed attempt to delete. Either try again or check for problems
on the USB hard disk.
The DVD menu information is lost when a disc is canceled
finalization.
Finalization cannot be undone.
(Finalization on discs other than DVD-RW discs created on
the PRV-LX1 cannot be undone.)
Failed attempt to unfinalize the disc. Disc may have problems.