Remote access code, Answering system settings – VTech LS6245 User Manual
Page 44
40
Answering system settings
Remote access code
A two-digit security code is required to access the
answering system remotely from any touch tone
telephone. The preset code is
19. You can change the
code to any number from
10 to 99.
To change the setting:
using the telephone base:
Press the
MeNu softkey when the telephone base is
not in use.
Press
/
VoL+
or
VoL-
/ to highlight Ans. system,
then press the
SeLeCT softkey.
Press
/
VoL+
or
VoL-
/ to highlight Ans sys setup,
then press the
SeLeCT softkey.
Press
/
VoL+
or
VoL-
/ to highlight Remote code,
then press the
SeLeCT softkey.
Use the dialing keys (
0-9) to enter a two-digit number
from
10-99, then press the SeT softkey to confirm
your setting.
using the handset:
Press the
MeNu softkey when the handset is not
in use.
Press
/
VoL+
/ or
CID
/
VoL-
/ to highlight ANS. SySTeM, then press the
SeLeCT softkey.
Press
/
VoL+
/ or
CID
/
VoL-
/ to highlight Ans sys setup, then press the
SeLeCT softkey.
Press
/
VoL+
/ or
CID
/
VoL-
/ to highlight Remote code, then press the
SeLeCT softkey.
Use the dialing keys (
0-9) to enter a two-digit number from 10-99, then
press the
SeT softkey to confirm your setting; or press the BACK softkey
to exit to the previous menu without making any changes.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Ans. system
Directory
Call log
SELECT
Del all old
Record memo
Ans sys setup
SELECT
Call screening
# of rings
Remote code
SELECT
REMOTE CODE
19
SET