VTech LS6245 - Manual (Page 56)

52
Telephone operation
Intercom
Use the intercom feature for conversations between two system handsets.
You can buy additional expansion handsets (
LS6204) for this telephone
system. You can register up to 12 handsets to the telephone base.
To initiate an intercom call from the telephone base:
Press the MeNu softkey when the telephone base is
not in use.
Press
/
VoL+
or
VoL-
/ to highlight Intercom, then
press the SeLeCT softkey.
When the telephone base shows INTeRCoM To:,
press /
VoL+
or
VoL-
/ to select a destination
handset and then press the SeLeCT softkey. The
telephone base shows Calling handset X. The
destination handset rings and its screen shows
Base is calling.
To initiate an intercom call with a handset:
Press the MeNu softkey when the handset is not
in use.
Press
/
VoL+
/ or
CID
/
VoL-
/ to highlight INTeRCoM,
then press the SeLeCT softkey.
When the handset shows INTeRCoM To:, press
/
VoL+
/ or
CID
/
VoL-
/ to select a destination and
then press the SeLeCT softkey.
If you are calling the telephone base, your handset
shows Calling base and the telephone base rings
and shows handset X is calling.
If you are calling another handset, your handset
shows Calling handset X and the destination
handset rings and shows handset X is calling.
To answer an intercom call at the telephone base:
Press /hoMe. Both screens show Intercom.
To answer an intercom at a handset:
Press /
hoMe
/
FLASh
or
.
Both screens show Intercom.
1.
2.
3.
1.
2.
3.
•
•
•
•
Call log
Page all HS
Intercom
SELECT
INTERCOM TO:
Handset 1
Handset 2
SELECT
BACK SELECT
INTERCOM
INTERCOM TO:
BASE
Handset 2
SELECT BACK