VTech LS6245 - Manual (Page 57)

53
Telephone operation
Intercom (continued)
To silence an intercom call:
Press the SILeNCe softkey on the telephone base or handset.
- oR -
Press oFF/
CLeAR
on the handset or CANCeL/ on the telephone base.
To end an intercom call:
Press the eND softkey, or press oFF/
CLeAR
on the handset or
CANCeL/ on the telephone base. Both screens show Intercom ended.
Answer an incoming call during an intercom call
When you receive an incoming home call during an intercom call, there is an
alert tone and Incoming call appears on screens.
Press /hoMe/
FLASh
on the handset or /hoMe on the telephone
base to answer the home call and the intercom call ends automatically.
- oR -
Press the BACK softkey to continue the intercom call.
When you receive an incoming cell call during an intercom call, there is an
alert tone and Incoming call appears on screens.
Press /CeLL on the handset or telephone base to answer the cell call
and the intercom call ends automatically.
- oR -
Press the BACK softkey to continue the intercom call.
oR -
Press the ReJeCT softkey if you do not want to answer the call. The
intercom call continues.
•
•
•
•
•
•
•
•
You can cancel the intercom call before it is answered by pressing
oFF/
CLeAR
on your originating handset; or CANCeL/ on the
telephone base.
If the other handset or the telephone base does not answer the intercom
call within 100 seconds, is in the directory or call log, or is out of range, your
originating handset or telephone base shows unable to call try again and
returns to idle mode.
You can use a maximum of four handsets, or three handsets and the
telephone base, at a time. When two handsets are used on an intercom call,
use two other system handsets for an outside call.
•
•
•