Message alert tone, Answering system settings – VTech LS6245 User Manual
Page 45
41
Answering system settings
Message alert tone
When the answering system is turned on, the telephone
beeps every 10 seconds to alert you of new messages.
The tone stops when all new messages have
been reviewed.
To change the setting:
using the telephone base:
Press the
MeNu softkey when the telephone base is
not in use.
Press
/
VoL+
or
VoL-
/ to highlight Ans. system,
then press the
SeLeCT softkey.
Press
/
VoL+
or
VoL-
/ to highlight Ans sys setup,
then press the
SeLeCT softkey.
Press
/
VoL+
or
VoL-
/ to highlight Msg alert tone,
then press the
SeLeCT softkey.
Press
/
VoL+
or
VoL-
/ to select on or off, then
press the
SeT softkey to confirm your setting.
using the handset:
Press the
MeNu softkey when the handset is not
in use.
Press
/
VoL+
/ or
CID
/
VoL-
/ to highlight
ANS. SySTeM, then press the SeLeCT softkey.
Press
/
VoL+
/ or
CID
/
VoL-
/ to highlight Ans sys setup, then press the
SeLeCT softkey.
Press
/
VoL+
/ or
CID
/
VoL-
/ to highlight Msg alert tone, then press the
SeLeCT softkey.
Press
/
VoL+
/ or
CID
/
VoL-
/ to select on or off, then press the SeT
softkey to confirm your setting; or press the
BACK softkey to exit to the
previous menu without making any changes.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
The answering system must be turned on for the message alert tone
to function.
Ans. system
Directory
Call log
SELECT
Del all old
Record memo
Ans sys setup
SELECT
# of rings
Remote code
Msg alert tone
SELECT
MSg ALERT TONE
On
Off
SET