VTech LS6245 - Manual (Page 83)

79
Appendix
Replace a handset
If you want to replace a handset or re-assign the designated handset number
of a registered handset, you must deregister all the handsets and then
individually register each handset.
To make deregistration easier, read all of the instructions on this page before
you begin.
To deregister all handsets:
Press and hold hoLD on the telephone base for about 10 seconds until
the telephone base displays Deregister all handsets?
Press the yeS softkey.
All system handsets show Searching for BASe. The deregistration
process takes about 10 seconds to complete. All handsets show
NoT ReGISTeReD when the deregistration completes.
If deregistration fails, the handset displays Registration failed and then
To register, pick up handset from ChARGeR. Pick up the registered
handset and try the deregistration process above again.
1.
2.
3.
You cannot deregister a handset if any system handset is in use.