VTech LS6245 - Manual (Page 52)

48
Telephone operation
Infrared sensor
This feature prevents you from pressing the keys
accidentally while you are using the handset
during a call.
When you put the earpiece of the handset next to
your ear or the infrared sensor is covered during a
call, all keys on the dial pad are disabled.
hold
You can place a home or cell call on hold. You will hear an alert tone if you
have not taken the call off of hold after 14 minutes. You will hear another
alert tone 30 seconds later. At 15 minutes on hold, the call on hold
automatically disconnects.
To place a home call on hold:
Press hoLD on the handset or telephone base. home call on hold
appears, /
hoMe
/
FLASh
on the handset and /hoMe on the telephone
base flash.
To resume a home call on hold:
Press /
hoMe
/
FLASh
on the handset or /hoMe on the telephone base.
To place a cell call on hold:
Press hoLD on the handset or telephone base. Cell call on hold
appears, /CeLL on the handset and telephone base flash.
To resume a cell call on hold:
Press /CeLL on the handset or telephone base.
handset locator
This feature helps you find a misplaced handset.
To start paging:
Press the MeNu softkey when the telephone base is
not in use.
Press
/
VoL+
or
VoL-
/ to highlight Page all hS,
then press the SeLeCT softkey on the telephone
base. The telephone base shows Paging all
handsets and the handset shows ** Paging **.
To end paging:
Press the SToP softkey or CANCeL/ on the
telephone base.
- oR -
Press /hoMe/FLASh
,
or any dialing keys ( 0-9, #, ) on the handset.
•
•
•
•
1.
2.
•
•
Directory
Call log
Page all HS
SELECT
Paging
all handsets
STOP
Infrared
sensor
Earpiece