VTech LS6245 - Manual (Page 7)

3
Getting started
Telephone base installation
Install the telephone base as shown below. The telephone base is designed
for tabletop use only.
Make sure that the electrical outlet is not controlled by a wall switch.
If you subscribe to digital subscriber line (DSL) high-speed Internet service
through your telephone line, you must install a DSL filter between the
telephone line cord and the telephone wall jack. The filter prevents noise and
caller ID problems caused by DSL interference. Contact your DSL service
provider for more information about DSL filters.
Use only the power adapter supplied with this product. To order a
replacement, visit our website at www.vtechphones.com or
call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial
1 (800) 267-7377.
The power adapter is intended to be correctly oriented in a vertical or
floor mount position. The prongs are not designed to hold the plug in place if
it is plugged into a ceiling, under-the-table or cabinet outlet.
•
•
Telephone line cord
DSL filter (not
included) is required
if you have DSL
high speed Internet
service
Telephone
base power
adapter
Electrical outlet
not controlled
by a wall switch
Telephone wall jack
Telephone base