VTech DS6321-2 - Manual (Page 20)

16
Bluetooth
Pair a headset
Before you begin, make sure that your Bluetooth enabled
headset is not connected to any other Bluetooth device.
Refer to your headset user's manual to learn how to search
for or add new Bluetooth devices.
To pair and connect a headset:
Press MeNu/
SeleCT
on the handset when it is not
in use.
Press or to highlight
Bluetooth, then press
MeNu
/SeleCT.
Press or to highlight Add headset, then press
MeNu
/SeleCT. The screen displays ADD heADSeT
Place Bluetooth headset next to base.
Press SeleCT.
If there are already four paired devices on the
paired devices list, the screen will show Maximum
of 4 devices can be paired and prompt you to
replace an existing paired device (page 21).
Press
MeNu
/SeleCT. The screen displays
Please set your headset to discoverable mode,
then press SeleCT.
If a device is already connected to the telephone
base, the screen displays Connected device will
be temporarily disconnected. Press SeleCT.
Press
MeNu
/SeleCT to temporarily disconnect the
device and continue the pairing process.
Set your headset to discoverable mode.
Press
MeNu
/SeleCT to set your telephone base to
discoverable mode and search for your headset.
Once the telephone base finds your headset, press
MeNu
/SeleCT.
Enter the PIN of your headset (the PIN for most
Bluetooth devices is 0000), then press
MeNu
/SeleCT.
1.
2.
3.
•
4.
•
5.
6.
7.
8.
Ans. system
Directory
Call log
Intercom
Bluetooth
ADD HEADSET
Place Bluetooth
headset next to
base.
Press
SELECT
BLUETOOTH
Download dir
Add cellular
Add headset
Active devices
Please set your
headset to
discoverable
mode, then
press
SELECT
ADD HEADSET
Enter PIN:
----
Searching for
Bluetooth
headsets...
FOUND DEVICES
Headset A
Headset B