VTech DS6321-2 - Manual (Page 41)

37
Answering system setup
In the answering system setup menu, you can change the settings for call
screening, number of rings, remote access code and message alert tone.
Call screening
The call screening feature lets you listen at the telephone
base to a caller leaving a message. You can turn this
feature on or off with a system handset.
To change the setting:
Press MeNu/
SeleCT
on the handset when it is not
in use.
Press or to highlight
Ans. system, then press
MeNu
/SeleCT.
Press or to highlight Ans sys setup, then press
MeNu
/SeleCT.
Press
MeNu
/SeleCT to choose Call screening.
Press or to choose on or off, then press
MeNu
/SeleCT to confirm.
Number of rings
When the answering system is turned on, it answers all
incoming home calls after the number of rings set. You can
choose from two, four, or six rings; or toll saver. With toll
saver selected, the answering system answers after two
rings when you have new messages, and after four rings
when you have no new messages. This enables you to
check for new messages and avoid paying unnecessary
long distance charges if you are calling from out of your
local area.
To change the setting:
Press MeNu/
SeleCT
on the handset when it is not
in use.
Press or to highlight
Ans. system, then press
MeNu
/SeleCT.
Press or to highlight Ans sys setup, then press
MeNu
/SeleCT.
Press or to highlight # of rings, then press
MeNu
/SeleCT.
Press or to choose from 2, 4, 6 or Toll saver, then
press
MeNu
/SeleCT to confirm.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Answering system settings
ANS. SYSTEM
Delete all old
Record memo
Answer ON/OFF
Ans sys setup
ANS SYS SETUP
Call screening
# of rings
Remote code
Msg alert tone
CALL SCREENING
On
Off
ANS SYS SETUP
Call screening
# of rings
Remote code
Msg alert tone
# OF RINGS
2
4
6
Toll saver