Visioneer MFC7050C - Manual (Page 106)

M E S S A G E C E N T E R
12-6
Printing a Fax Message
Once you print a new fax message stored in memory, it is erased
from the memory automatically.
1 Press Play . After two seconds, the MFC begins to play voice
messages. Afterward, if there are fax messages in memory,
you can print them:
PRINT FAX?
1.YES 2.NO
2 To print the faxes in memory, press 1 —OR—Press 2 to exit
without printing.
Backup Printing Option
When you choose FAX: ON in the Message Center mode, all
incoming fax messages are stored in the available memory for
retrieval. Turn on this function to print backup copies.
1 Press Function , 1 , 7 , 2 .
BACKUP PRINT:ON
SELECT & SET
2 Press or to display ON (or OFF) and press Set .
3 Press Stop to exit.
Erasing Messages
If you choose to erase all fax messages, the MFC will print any
previously unprinted fax messages before erasing them from
memory. Fax messages cannot be erased individually.
You can erase voice messages individually, or all at once.
To erase voice messages individually
1 Press Play . After two seconds, the MFC beeps and begins
message playback. Each message is preceded by one long
beep, and followed by two short beeps.
2 To erase a specific message, press Erase immediately after the
two short beeps, or while the message is playing.
ERASE THIS MSG.?
1.YES 2.NO
3 Press 1 to erase the message—OR—Press 2 to cancel.
4 Press Stop to exit.