Visioneer MFC7050C - Manual (Page 74)

S E T U P S E N D
7-2
Resolution
■ Press Resolution (before you send the fax) to select the resolution
for the document you’re sending.
Resolution
Fine
Photo
S.Fine
Standard—Suitable for most typed documents. (Fine and S.
Fine lights are off.)
Fine—Good for small print; transmits slower than standard
resolution. (Only the Fine light is on.)
Super Fine—Good for small print or artwork; transmits
slower than fine resolution. (Only the S. Fine light is on.)
Photo—Use when document has varying shades of gray;
slowest transmission time. (Both Fine and S. Fine lights are
on.)
The receiving fax machine must have the same resolution, or the
transmission will fall back to the next resolution on the receiving
machine.
Manual Transmission
Manual transmission lets you hear the dial tone, ringing and fax
receiving tones before sending the fax.
1 Insert the document face down in the feeder.
2 Pick up the handset and listen for a dial tone
—OR—press
Hook and listen for a dial tone.
3 Enter the fax number you want to call (you can enter the digits
using the dial pad, or you can enter a One Touch or Speed Dial
number or you can call from the Tel-index).
4 When you hear the fax tone, press Start .
5 If you are using the handset, hang up.
See
One Touch
Dialing
p. 9-2