Visioneer MFC7050C - Manual (Page 94)

T E L E P H O N E O P E R A T I O N
9-4
Redial
If you dialed using Hook and got a busy signal, press Hook again to
clear the line. You can dial again easily by pressing Redial/Pause .
Tone/Pulse
If you have pulse dialing service, but need to send tone signals
(for telephone banking, for example), follow the directions below.
If you have touch tone service, you do not need this feature to
send tone signals.
1 Lift the handset.
2 Press . Digits dialed after this send tone signals.
3 When you hang up, the MFC returns to pulse dialing service.
Searching Telephone Index
You can search for names you have stored in One Touch and Speed
Dial memories. Names are stored alphabetically.
1 Press Tel-index , then enter the first letter of the name you’re
looking for.
2 Press or to search the memory.
3 When the screen displays the name you want to call, press
Hook , (or for a voice call, pick up the handset).
4 Press Start to begin dialing.
5 If you pressed Hook to dial the call, pick up the handset when
the other party answers. (The speaker works only one way; the
other party won’t be able to hear you unless you pick up the
handset.)
6 When the call is over, hang up.
See
Storing One
Touch Dial
Numbers
p. 8-1
and
Storing Speed
Dial Numbers
p. 8-3