Visioneer MFC7050C - Manual (Page 88)

S E T U P A U T O D I A L N U M B E R S
8-4
Changing One Touch and Speed Dial
Numbers
If you try to store a One Touch or Speed Dial number in a location
where a number is already stored, the screen displays the current
name stored there, then prompts you to either
1. CHANGE—OR—2. EXIT.
1 Press 1 to change the number stored, or press 2 to exit
without making a change.
2 Enter a new number and press Set .
■ If you want to erase the whole number, press Stop when the
cursor is to the left of the digits. The letters above and to
the right of the cursor are deleted.
■ If you want to change a digit, use or to position the
cursor under the digit you want to change, then type over it.
3 Follow the directions beginning at Step 4 in Storing One
Touch Numbers or Storing Speed Dial Numbers.