Visioneer MFC7050C - Manual (Page 108)

M E S S A G E C E N T E R
12-8
ICM Recording Monitor
This feature lets you turn OFF (or ON) the speaker volume for
voice messages. When you turn the monitor OFF, you will not
hear messages as they come in.
1 Press Function , 1 , 7 , 5 .
2 Use or to select OFF (or ON) and press Set .
3 Press Stop to exit.
Fax Forwarding/Paging
When Paging is set to ON, your MFC dials the pager number
you’ve programmed, and dials your Personal Identification
Number (PIN) when connected, to activate your pager and let you
know you have a fax or voice message in the Message Center
memory.
When Fax Forwarding is set to ON, your MFC dials the fax
number you’ve programmed, and forwards any faxes you’ve
received.
Programming a Fax Forwarding Number
1 Press Function , 1 , 7 , 6 .
2 Press or until the screen displays
FAX FORWARD?
and press Set .
FWD#:
ENTER & SET
3 Enter the number where faxes will be forwarded (up to 20
digits) and press
Set .
4 Press Stop to exit.
You can change a Fax Forwarding number remotely
(see page 12-14).