Visioneer MFC7050C - Manual (Page 48)

O N - S C R E E N P R O G R A M M I N G
4 -2
Alternating Displays
When you see alternating displays, the LCD sometimes alternates
between the currently selected option, and a help message giving
brief instructions about how to proceed. The display you’ll
probably see most often is shown below, showing you, when you
place a document in the feeder, that you can dial a number and
send a fax, or you can make a copy.
FAX: NO. & START
COPY: PRESS COPY
Function Selection Table
You can probably perform most of these programming settings
without the Owner’s Manuals. To help you understand the function
selections, options and settings that are found in the MFC
programs, use the Function Selection Table on the next page.