Retrieving memory status list, Retrieving fax messages – Visioneer MFC7050C User Manual
Page 113
M E S S A G E
C E N T E R
12 -13
Messa
g
e
Center
Retrieving Memory Status List
You can retrieve the Memory Status List from a remote fax
machine to see if you have any fax messages.
1
Dial your MFC number.
2
When you hear the beep, immediately enter your Remote
Retrieval Access Code (
1
5
9
).
3
When you hear two short beeps, use the dial pad to press
9
6
1
.
4
Using the dial pad, enter the number (up to 20 digits) of the
remote fax machine where you want the Memory Status List
forwarded, and then press
.
You cannot use
and
as dial numbers. However, if you want
to store a pause, press
.
5
After you hear your MFC beep, hang up and wait.
Your MFC calls the remote fax machine. The remote fax
machine prints the Memory Status List.
Retrieving Fax Messages
1
Dial your MFC number.
2
When you hear the beep, immediately enter your Remote
Retrieval Access Code (
1
5
9
).
3
As soon as you hear two short beeps, use the dial pad to press
9
6
2
.
4
Using the dial pad, enter the number (up to 20 digits) of the
remote fax machine where you want your fax messages
forwarded, and then press
.
You cannot use
and
as dial numbers. However, if you want
to store a pause, press
.
5
After you hear your MFC beep, hang up and wait.
Your MFC calls the remote fax machine. The remote fax
machine prints your fax messages.