Visioneer MFC7050C - Manual (Page 33)

M F C S E T U P A N D C O N N E C T I O N S
2 -13
Assemb
ly
and
Connections
Aligning Ink Cartridges
This feature allows you to check and align the ink cartridges to
assure best print quality. Make sure there is paper in the cassette
before you start the alignment procedure.
1 Press Ink Management .
2 Press or to select 2.ALIGNMENT and press Set .
2.ALIGNMENT
LOAD PAPER AND
PRESS START KEY
3 Press Start . The MFC prints the Alignment Test Sheet.
PRINTING
Study the alignment page and decide which sample numbers
show the most evenly printed ink lines for A, B, C and D.
(If you are using the Photo ink cartridge, only ink lines A and
B will be printed.)
4 Using the dial pad, press Set after you enter each level of
adjustment for:
A (0 to 30), B (0 to 15), C (0 to 30) and D (0 to 30).
5 Press Stop to exit.