Vanguard Managed Solutions Vanguard 7300 Series - Manual (Page 115)

Operating Your Vanguard 7300 4-5
Accessing the Control Terminal Port
Figure 4-2 shows a typical Vanguard 7300 CTP terminal power-up display for a
Vanguard 7300 with Serial cards.
.
* BOOTPROM Revision: V1.50, Creation Date: 20-May-2002
Copyright: Copyright (C)
* Config - Requested to load alte_img
* The Current Image identifies as V6.1.R000_IP_7, 08 Feb 2002
* The Alternate Image identifies as V6.1.R000_MS_7, 06 Feb 2002
***********************************************
* Vanguard 7300 - Loading Flash Program Loader* Copyright 2002 *
* Vanguard 7330 - Diagnostics Software Loading * Copyright 2002 *
7300 Series Router Power-On Diagnostics For 8 Slot Chassis...
Executing V7300 STARTUP Diagnostics...
Loading T1/E1 Diagnostics Image to Slot[2], Please Wait <PASSED>
DRAM Test:(Quick Test) (4000 -- 7000000) <<-PASSED->>
Testing Motherboard Serial PMC Module <<---NA--->>
Testing Compact PCI Serial Module in Slot 3
Testing Serial Slave Internal Loopback <<-PASSED->>
Testing Compact PCI Serial Module in Slot 4
Testing Serial Slave Internal Loopback <<-PASSED->>
Testing Compact PCI Serial Module in Slot 5
Testing Serial Slave Internal Loopback <<-PASSED->>
Testing Mezzanie Dual-Port Ethernet Card <<-PASSED->>
Testing Dual-Port Ethernet Card in <<---NA--->>
Testing Raven Registers <<-PASSED->>
Testing Processor Card Ethernet Port <<-PASSED->>
Processor Card Flash Test: AMD Flash Detected <<PASSED>>
SIMM Flash Test: 8Meg-INTEL Flash Detected <<PASSED>>
Testing NVRAM <<-PASSED->>
Testing Compact Flash <<-PASSED->>
Testing T1/E1 Card in Slot[2], Please Wait <PASSED>
Exiting V7300 STARTUP Diagnostics...
Figure 4-2. A Sample Boot Console Display, Serial Cards
****************************************************
* Vanguard 7300 - Bootprom Program Loading *
* Copyright 2002
****************************************************
************************************************
OK
************************************************