Vanguard Managed Solutions Vanguard 7300 Series - Manual (Page 87)

Vanguard 7300 Installation 3-13
Removing And Replacing Vanguard 7300 Front Covers
The Vanguard 7330
Version 1 Front
Cable Channel The fixed right 7330 Version 1 front cover panel contains the cable channel at the
bottom. All front-connected interface cables run through the channel behind the
fixed panel to exit on the right side of the chassis. For example, see the location of
the shielded Ethernet cable in Figure 3-8.
Use the procedure in this table to remove the Vanguard 7330 fixed front cover panel
and position the cables:
Figure 3-8. The Vanguard 7330 Version 1 Cable Channel
Step Action
1 Remove the two black nuts on each side to free the panel.
2 Place the cover on a flat, level surface, painted side up.
3 Gather all front cables and align them neatly in the cable channel.
4 Replace the front cover panel and secure it with the four nuts.
Shielded Ethernet
Cable