Vanguard Managed Solutions Vanguard 7300 Series - Manual (Page 65)

Vanguard 7300 Enclosures and Components 2-33
Vanguard 7300 Cards
ATM Compression Follow the steps in the table below. This configuration allows the data from an
LCON-1 to go out to an ATM station compressed.
Step Action
1 Under the Configure Network Services Menu, select PVC Setup Table.
Entries are:
Source: aam-10s1
Destination: lcon-1
2 Under the Configure Network Services Menu select Network Services
Feature Table.
Entries are:
Port/Station Identifier: lcon-1
Data Compression Level: FORCE_ON
Note
When PVC is configured the Data Compression Level should be set to
FORCE_ON.