Motor base, Control panel, Cover door – Vita-Mix XTG012 User Manual

Page 21: In-counter gasket

Advertising
background image

CARE NOTE:

Do not let mixtures, liquids and food products dry within the

container. Rinse throughout use. Drying product may lock around the blade and

weaken/tear the bearings seal when restarted. Do not place containers in the freezer.

Extremely low temperature combined with hot ingredients and/or the immediate

rapid action of the blade may crack the container.

Motor Base

1. Unplug the power cord.

2. Wash outside surface with a damp soft cloth or sponge, which has been rinsed

in a mild solution of liquid dish soap (Ivory Liquid

®

or equivalent) in warm water.

NEVER IMMERSE MOTOR BASE IN WATER OR OTHER LIQUID. NEVER

POUR WATER OR ANY OTHER LIQUID ON THE MOTOR BASE.

3. Polish with a soft cloth.

Control Panel

Gently wash the front panel with a soft cloth and a low pH balanced soap, being

careful not to scratch the Display Window.

NOTE: Be sure to wring excess water out of cloth or sponge when cleaning

around the controls, drive socket or any electrical part.

Lid

Separate the lid and plug, then wash in warm soapy water. Rinse clean under

running water and dry. Reassemble before use. (See pages 8 & 9.)

Cover Door

The cover can be removed (see page 9) and cleaned by placing under running

water and washed with a soft cloth. Wipe dry and replace back on the base.

NOTE: DO NOT wash cover door in dishwasher.

In-Counter Gasket

Carefully remove the gasket from under the blender (In-Counter model only). Wash

the gasket in warm, soapy water, rinse clean and let dry. Reassemble before use.

(See page 12.) Make sure the gasket is seated properly against the blender

and the counter.

21

CONTINUED ON PAGE 22

Advertising