Vita-Mix XTG012 User Manual

Page 7

Advertising
background image

4. Insert the custom programmed chip with the

words, “THIS SIDE FACING TO THE FRONT

OF THE MACHINE” toward you and the

silver contact bars up, into the slot. The

DISPLAY WINDOW will read “NEW MODULE.”

5. Within 10 seconds the six PRE-SET

buttons will be re-programmed and the

DISPLAY WINDOW will read “SAVED” then

“READY.” If nothing happens when the

programming chip is fully inserted, turn the

chip in the opposite direction and try again.

6. Remove the programming chip and return

it to the original package.

7. Press one of the six PRE-SET buttons to

reveal, in the DISPLAY WINDOW, the name of

the program/drink.

8. Carefully place the Blending Station MP motor

back into the hole in the counter.

Resetting the PRE-SET buttons to the original
factory settings

WARNING: Please read all step before reprogramming. Resetting the

PRE-SET PROGRAM buttons will revert the six program buttons to times

that are not optimized for the MP48 container. Use the program chip

supplied with your machine and follow the instructions on page 6 for

programming your machine with the correct MP programs.

1. Enter the OWNER CONTROLS (press the Vita-Mix Logo). “MODE” will appear

in the display window. Press the PRE-SET buttons 1 and then 6. The display

window will say “COUNT TEMP TOTAL.”

2. Press the Vita-Mix Logo two more times to reveal the instructions on resetting the

PRE-SET buttons.

3. Press and hold button 4 until the DISPLAY WINDOW reads “RESTORING PLEASE

WAIT.” The PRE-SET buttons are now reset to the original factory settings.

P

ERFORMANCE

M

AXIMUM

Custom

Programmed

Chip

In-Counter

Hole

7

Advertising