Western Telematic MPC-20VS16-3 - Manual (Page 190)

17-11
Command Reference Guide
/G Plug Group Parameters
Displays a menu that is used to View, Add, Modify or Delete Plug Groups. For more
information on Plug Groups, please refer to Section 5.6.
Availability: Administrator
Format:
/G [Enter]
/N Network Port Parameters
Displays a menu which is used to select parameters for the Network Port. Also allows
access to the IP Security function, which can restrict network access by unauthorized IP
addresses. Note that all of the functions provided by the /N command are also available
via the Web Browser Interface. For more information, please refer to Section 5.9.
Availability: Administrator
Format:
/N [Enter]
/RB Reboot Options
Displays a menu that is used to configure Scheduled Reboots and Ping-No-Answer
Reboots. Scheduled Reboots allow the MPC to be rebooted on a regular basis,
according to a user defined schedule. Ping-No-Answer Reboots allow the MPC to
automatically reboot user-designated outlets when a user-specified IP address does not
respond to a Ping command. For more information on Reboot options, please refer to
Section 6.
Note: If desired, the Ping-No-Answer Reboot function can also be configured
to send email notification whenever a Ping-No-Answer Reboot is generated. For
more information, please refer to Section 7.6.
Availability: Administrator
Format:
/RB [Enter]
/AC Alarm Configuration Parameters
Displays a menu that is used to configure and enable the Over Current Alarms, Over
Temperature Alarms, Circuit Breaker Open Alarm, Lost Communication with AUX Units
Alarm, Lost Voltage Alarm, Ping-No-Answer Alarm, and the Invalid Access Lockout
Alarm. When properly configured, the Over Current Alarms and Over Temperature
Alarms offer the option of "Load Shedding", which allows the unit to automatically switch
Off user-specified non-essential outlets when temperature or current readings exceed
user-defined values. For more information on Alarm Configuration, please refer to
Section 7.
Availability: Administrator
Format:
/AC [Enter]