Western Telematic MPC-20VS16-3 - Manual (Page 47)

5-16
Basic Configuration
5.3.4.3. Reading and Erasing Logs
To read the status logs access the command mode, then proceed as follows:
• Text Interface: Type /L and press [Enter] to display the Display Log menu. Select
the desired Log from the menu, key in the appropriate number and press [Enter],
and then follow the instructions in the resulting submenu.
• Web Browser Interface:
• Audit Log: Move the cursor over the "Logs" link on the left hand side of the
screen. When the fly-out menu appears, click on the "Audit Log" link.
• Alarm Log: Move the cursor over the "Logs" link on the left hand side of the
screen. When the fly-out menu appears, click on the "Alarm Log" link.
• Current Metering Status: Move the cursor over the "Current Metering" link on
the left hand side of the screen. When the fly-out menu appears, click on the
"Current Metering Status" link.
• Current History: Move the cursor over the "Current Metering" link on the
left hand side of the screen. When the fly-out menu appears, click on the
"Current History" link and then pick the desired display option from the resulting
submenu.
• Power Range: To display power consumption over a user defined time period,
move the cursor over the "Power Metering" link on the left hand side of the
screen. When the fly-out menu appears, click on the "Power Range" link and
then specify the desired time period using the resulting submenu.
• Power History: Move the cursor over the "Power Metering" link on the left hand
side of the screen. When the fly-out menu appears, click on the "Power History"
link and then pick the desired display option from the resulting submenu.
Notes:
• The Current Metering Log and Power Metering Log menus allow you to
display the Current Log in either graph format, ASCII format, CSS format or
XML format.
• You can also display current readings via the Current Metering function. In
the Text Interface, type /M and then press [Enter].