Western Telematic MPC-20VS16-3 - Manual (Page 37)

5-6
Basic Configuration
SYSTEM PARAMETERS:
1. User Directory
2. Site-ID: (undefined)
3. Real Time Clock: 08/13/2008 18:07:55
4. Invalid Access Lockout: On
5. Command Confirmation: On
6. Automated Mode: Off
7. Command Prompt: MPC
8. Temperature Format: Fahrenheit
9. Temperature Calibration: (undefined)
10. Voltage Calibration: (undefined)
11. Log Configuration
21. Audit Log: On - Without Syslog
22. Alarm Log: On - Without Syslog
23. Current Metering Log: On
12. Callback Security: On - Callback (Without Password Prompt)
13. Front Panel Buttons: On
14. Power Configuration
Enter: #<CR> to change,
<ESC> to exit and save configuration ...
Figure 5.3: The System Parameters Menu (Text Interface)
Figure 5.4: The System Parameters Menu (Web Browser Interface)