Western Telematic MPC-20VS16-3 - Manual (Page 99)

5-68
Basic Configuration
5.9.10.1. Dictionary Support for RADIUS
The RADIUS dictionary file can allow you to define a user and assign command access
rights and plug access rights from a central location. The RADIUS dictionary file,
"dictionary.wti" is included on the CDROM along with this user's guide. To install the
dictionary file on your RADIUS server, please refer to the documentation provided with
your server; some servers will require the dictionary file to reside in a specific directory
location, others will require the dictionary file to be appended to an existing RADIUS
dictionary file.
The WTI RADIUS dictionary file provides the following commands:
• WTI-Super - Sets the command access level for the user. This command provides
the following arguments:
0 = ViewOnly
1 = User
2 = SuperUser
3 = Administrator
For example, in order to set command access level to "SuperUser", the command
line would be:
WTI-Super="2"
• WTI-Plug-Access - Determines which plug(s) the user will be allowed to access.
This command provides an argument that consists of a four character string, with
one character for each the MPC's switched outlets. The following options are
available for each switched plug:
0 = Off (Deny Access)
1 = On (Allow Access)
For example, to allow access to Plugs 2 and 4, the command line would be:
WTI-Plug-Access="0101"
• WTI-Group-Access - Determines which plug group(s) the user will be allowed
to access. The argument for this command includes a character for each, defined
plug group, with the first character in the string being used to represent the first
plug group defined, and the last character in the string representing the last plug
group defined. The following options are available for each plug group:
0 = Off (Deny Access)
1 = On (Allow Access)
For example, to allow access to the first three defined plug groups out of a total of
six defined plug groups, the command line would be:
WTI-Group-Access="111000"