Western Telematic MPC-20VS16-3 - Manual (Page 79)

5-48
Basic Configuration
• Baud Rate: Any standard rate from 300 bps to 115.2K bps. (Default = 9600 bps)
• Bits/Parity: (Default = 8-None)
• Stop Bits: (Default = 1)
• Handshake Mode: XON/XOFF, RTS/CTS (hardware), Both, or None.
(Default = RTS/CTS)
• Inactivity Timeout: Enables and selects the Timeout Period for this port. If
enabled, the port will disconnect when no additional data activity is detected for the
duration of the timeout period. (Default = 5 Minutes.)