WatchGuard Technologies WatchGuard Firebox SOHO 6 - Manual (Page 116)

Chapter 9: SOHO 6 WebBlocker
98 WatchGuard Firebox SOHO 6.1
Configure the SOHO 6 WebBlocker
Use the WatchGuard SOHO 6 Configuration pages to activate
WebBlocker, create a full access password for bypassing
WebBlocker, define an inactivity timeout that sets the duration of
the full access password, define the categories you want to block,
and configure WebBlocker groups and users.
Activate WebBlocker
Follow these instructions to activate WebBlocker, create a full
access password, define the inactivity timeout value, and require
that your Web users authenticate (if your are using the groups and
users feature option).
1 With your Web browser, go to the SOHO 6 Configuration
Settings page using the Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
2 From the navigation bar on the left side, select
WebBlocker => Settings.
The WebBlocker Settings page appears.