WatchGuard Technologies WatchGuard Firebox SOHO 6 - Manual (Page 90)

Chapter 6: Configure the Firewall Settings
72 WatchGuard Firebox SOHO 6.1
Create an Unrestricted Pass Through
The SOHO 6 is able to allow traffic to be passed through to a
dedicated machine with a public IP address separated from the
rest of the Trusted network.
Follow these steps to configure a pass through:
1 With your Web browser, go to the System Status page using the
Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
2 From the navigation bar on the left side, select
Firewall => Pass Through.
The Unrestricted Pass Through IP Address page appears.
3 Select Enable pass through address.
4 Enter the IP address to the pass through machine in the
appropriate field. This must be a public IP address.
In our example, 208.253.208.103.
5 Click Submit.
N OTE
Use of the Pass Through feature increases the security risk to computers
on the Trusted network. This is because the computer using the Pass
Through resides on the same Ethernet segment as the Trusted network. If
you are not completely and thoroughly familiar with the risks involved