WatchGuard Technologies WatchGuard Firebox SOHO 6 User Manual
Page 64
Chapter 4: Configure the Network Interfaces
46
WatchGuard Firebox SOHO 6.1
Once you have upgraded to the SOHO 6 to activate this features,
follow these instructions to configure Dual ISP Port:
1
Connect one end of a straight-through Ethernet cable into the
OPT port, and connect the other end into the source of the
secondary or fail-over External network connection. This can
be either a DSL/cable modem or Hub.
2
With your Web browser, go to the System Status page using the
Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
3
From the navigation bar on the left side, select
Network => Dual ISP.
The Dual ISP Options page appears.
4
Select the Enable Dual ISP checkbox.
5
Enter the IP address for the External Interface.
6
Enter the IP address for the Optional or Failover Interface.
7
Enter how many seconds between pings.
8
Enter how long (in seconds) to wait for a reply.