Vpn management – WatchGuard Technologies WatchGuard Firebox SOHO 6 User Manual
Page 132
Chapter 10: Support Resources
114
WatchGuard Firebox SOHO 6.1
5
Enter the protocol number to allow in the Protocol field.
6
Click Submit.
7
From the navigation bar on the left side, select
Firewall => Incoming.
The Firewall Incoming Traffic page appears.
8
Near the bottom of the page, under the Custom Service header,
locate the service you created and select Allow from the drop
list.
9
Under the header Service Host, enter the IP address of the
computer to which this traffic is allowed.
10 Click Submit.
VPN Management
Before setting up VPN, you must have:
• Two properly configured and working SOHO 6s or one
SOHO 6 with the latest version of firmware and one Firebox
II/III. Each SOHO 6 must have the VPN option activated.
• The static external IP address, the network address, and the
subnet masks of both appliances. (The base trusted IP
address of each SOHO 6 must be static and unique.)
• The DNS and WINS server IP address, if used.
• The shared key (passphrase) for the tunnel.
• The same encryption method for each end of the tunnel
(DES or 3DES).
• The same authentication method for each end
(MD-5 or SHA-1).