WatchGuard Technologies WatchGuard Firebox SOHO 6 - Manual (Page 46)

Chapter 3: SOHO 6 Basics
28 WatchGuard Firebox SOHO 6.1
N OTE
You must have JavaScript enabled on your browser to be able to activate
LiveSecurity Service.
If you are a returning customer, log in with your user name and
password then choose your product and continue by following the
instructions on screen.
If you are a new WatchGuard customer, begin by creating a profile,
then follow the instructions on screen for activating a product.
Please use the table below to record your LiveSecurity Service
identification information:
The SOHO 6 serial number is located on the bottom of the
appliance. You create a LiveSecurity Service user name and
password when you register your SOHO 6.
Please keep this information in a secure place.
Reboot the SOHO 6
To reboot a SOHO 6 located on a local system, use one of these
methods:
• With your Web browser, go to the System Status page using
the trusted IP address of the SOHO 6. For example, if using
Serial Number:
LiveSecurity User Name:
Password: