Configuration – WatchGuard Technologies WatchGuard Firebox SOHO 6 User Manual
Page 129
User Guide
111
Troubleshooting Tips
How can I see the MAC address of my SOHO 6?
A MAC (Media Access Control) address is a unique number used
to identify the actual physical hardware of an Ethernet appliance.
1
With your Web browser, go to the SOHO 6 Configuration
Settings page using the Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
2
Towards the bottom of the System Status page, you see the
External network header on the right side. Two MAC
addresses are often listed.
Please note these addresses and have them ready if you need Technical
Support.
Configuration
Where are the SOHO 6 settings stored?
The configuration parameters are stored in memory on the
SOHO 6.
How do I set up DHCP on the trusted network of the
SOHO 6?
1
Make sure your computer is set up to use DHCP. For
instructions, see “Enable your computer for DHCP” on
page 16.
2
With your Web browser, go to the System Status page using
the Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
3
From the navigation bar on the left side, select
Network => Trusted.
4
Select Enable DHCP Server and then click Submit.