WatchGuard Technologies WatchGuard Firebox SOHO 6 User Manual
Page 130
Chapter 10: Support Resources
112
WatchGuard Firebox SOHO 6.1
How do I change to a static, trusted IP address?
Before you can use a static IP address, you must have a base
Trusted IP address and subnet mask.
The following IP address ranges and subnet masks are set aside for
private networks in compliance with RFC 1918. Replace the Xs in
the network IP address with a number between 1 and 254. The
subnet addresses do not need to be changed.
To change to a static, trusted IP address:
1
With your Web browser, go to the System Status page using
the Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
2
From the navigation bar on the left side, select
Network => Trusted.
3
Disable Enable DHCP Server and then click Submit.
4
Enter the information. Click Submit.
How do I set up and disable Webblocker?
1
With your Web browser, go to the System Status page using
the Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
2
From the navigation bar on the left side, select
WebBlocker => Settings.
The WebBlocker Settings page appears.
3
Select Enable WebBlocker. Enter a full access password, and
an inactivity timeout (in minutes).
Network IP range
Subnet mask
10.x.x.x
255.0.0.0
172.16.x.x
255.240.0.0
192.168.x.x
255.255.0.0