WatchGuard Technologies WatchGuard Firebox SOHO 6 - Manual (Page 98)

Chapter 7: Configure Logging
80 WatchGuard Firebox SOHO 6.1
To adjust your syslog messages to your browsers local time:
• Select Include local time in syslog message.
N OTE
Syslog traffic is not encrypted and use of this option creates a potential
security risk when the information is sent over the Internet. However, if
this traffic is sent through a VPN tunnel the traffic is encrypted with
IPSec technology and therefore less of a security risk.
Set the System Time
The SOHO 6 stamps each log entry with the time that the event
occurred.
The log entry time stamp displays the time of day according to the
settings for the system time.
To set the system time:
1 With your Web browser, go to the System Status page using the
Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1.
2 From the navigation bar on the left side, select
Logging => System Time.