Yamaha CVP-103M EN - Manual (Page 141)

141
CVP-103
Disk
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
139
Press the CH.SET button to input the selected characters at the current
underline position of the file name. Continue moving the cursor to other
characters or marks and entering them in this way.
To delete the character at the previous position, press the BACK button.
The character before the underline cursor is deleted and the cursor moves
back to the deleted position.
To abort the name entry operation and return to the FUNCTION [DISK
1] display, press the CANCEL button.
When the file name has been completely entered, press the SAVE button
to execute the Save operation.
If you enter a name that already exists on the disk, a “ Same name!
Overwrite?” message will appear. Press the OK button to overwrite the
original file with the new file, or
CANCEL to cancel the Save operation.
■ DELETE
................................................................................................................................
When you select DELETE, the Delete function display will appear.
First, select the desired file to be deleted. Press either of the two leftmost
LCD buttons to select the file, then press the OK button.
➔ An “ Are you sure? ” message is displayed. Press the YES button to
delete the selected file, or the NO button to abort the Delete operation.
First, select the desired file to be named. Press either of the two leftmost
LCD buttons to select the file, then press the OK button.
➾ The name entry display will appear. Enter a new file name in the same
way as described above for the Save function.
➾ Pressing the OK button changes the current name to the newly en-
tered name. Press the CANCEL button to abort. If you enter a name
that already exists on the disk, a “ Same name! Overwrite? ” mes-
sage will appear. In this case, press the OK button to overwrite the
original file with the renamed file, or CANCEL to abort the Name op-
eration.
■ NAME
......................................................................................................................................
When you select NAME, the Name function display will appear.