Yamaha CVP-103M EN - Manual (Page 79)

79
CVP-103
Use the > LCD button to position the underline cursor at the charac-
ter you want to change (style names can be up to 12 characters in
length). Use the data dial and/or the [–] and [+] buttons to select the
character you want to enter from the list in the center of the display, then
press the
CH.SET LCD button to enter the character at the current cursor
position. Repeat this procedure until your name is complete. The BACK
LCD button can be used to back up one space and delete the preceding
character.
When the name is complete, press OK to register the name for the
current custom style, or CANCEL to abort.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Creating Your Own Styles
77
Store the custom style.
..............................................................................
The current tempo setting at the time the
custom style is stored becomes the
preset tempo for that style.
Press the STORE LCD button in page 3 of the CUSTOM STYLE
display to store the current custom style in the Clavinova’s memory.
➔ The Clavinova displays a message asking you to confirm your
decision to store the style.
➾ Use the MEMORY No . ▼ and ▲ buttons, the data dial, or the [–]
and [+] buttons to select the memory number (1 through 4) where
you want to store the custom style, then press OK to store or
CANCEL to abort.
If the selected memory number already
contains a style, the style name will
appear next to the memory number. The
existing style will be overwritten when a
new style is stored.