Yamaha CVP-103M EN - Manual (Page 77)

77
CVP-103
< Record the selected part.
..................................................................
• Playback of the custom style can be
started and stopped by pressing the
[START/STOP] button. (Data cannot
be recorded while playback is
stopped.)
• All notes are automatically stopped at
the end of the style (i.e., at the point
between repeats when recording). It is
therefore not advisable to record over
this point.
You can now record new notes in the selected part by playing the
keyboard at the appropriate timing. Record non-percussion parts in C
major seventh (CM7), since the custom style is recorded as a C ma-
jor seventh pattern.
If you want to create a totally new part from scratch, press the
CLEAR LCD button to clear the selected part before beginning to
record. If both the
R1 and R2 parts are cleared, the metronome will
sound to provide a timing guide. (The metronome sound is not re-
corded, and will stop as soon as the custom style is stored.)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Creating Your Own Styles
75
When recording a drum kit voice in part R1 or R2, you can clear a
single drum instrument from the part by pressing the key corresponding
to the instrument to be cleared while holding down the C1 key on the
keyboard. (The C1 key is labeled “CANCEL.”) The metronome timing
guide can also be cleared in this way.
Another useful recording aid is the SOLO LCD button: when this
button is pressed and highlighted, only the selected part will sound. Press
the
SOLO button again to turn the solo function off and hear all parts in
the selected section.